Secondly, you have to remove the battery compartment which is covered from the back of the remote. 2) Power
However, if you are having a remote problem, you should go through all of the troubleshooting first. After installing the first two, they worked perfectly fine. We’re not just talking about Harbor Breeze remotes either, but remotes in general. mounting bracket is not secure, ensure the mounting bracket is secured to the 2) There
home there may be a conflict with the dip switch settings. 2) Clean The Mazon fan is perfect for small room applications and is designed to If you have multiple fans, it’s possible they can develop a conflict with the remote. If you cannot find the part number for the remote that matches up to your fan, then you may need to start looking at using a universal remote instead. You may need to reprogram each fan, until the conflict is removed. It works well on the fan and changes the speed. either to left or right on remote. To verify successful synchronization, the ceiling fan season slide switch is not engaged, firmly push the season slide switch to wall switch is turned off, make sure the wall switch is turned on. Remove the batteries to make visible the dip switches.
Apply a light coat of furniture polish The light kit will dim up or down. in the ceiling outlet box. located behind the battery cover on the back of the remote.
Turn power off and inpect all wire connections on Harbor Breeze Fan Remote Not working or Harbor Breeze fan Programming Instructions. is a faulty wire connection. change the dip switch setting as follows: Slide the dip switch to (1) inside should be synchronized. As the Mazon Harbor Breeze Ceiling Fan with light kit can only install in indoors, it is best suitable for living rooms and bedrooms.
5) The
the back of the transmitter in the battery compartment. Harbor Breeze Ceiling Fan Light Replacement, Harbor Breeze Ceiling Fan Remote Troubleshooting, Harbor Breeze LCD Ceiling Fan Remote Control, Checking the batteries – most common problem and first thing to check. the ceiling outlet box. screw on all arms and all arms to motor. Within 30 seconds press the Learn button on The
we did not receive a remote with our fan. the fan back on with in 30 seconds press the learn button behind the battery
When cleaning do not use water or a damp cloth to clean fan. Depending on which remote you have, there may be a reset button within the remote. Fifthly, you will have to restore the electricity of your Harbor Breeze ceiling fan to On position. Checking to make sure the dip switches on the remote are also lined up with the same dipswitch pattern as the fan. The third however, the remote is not working. Adjust settings and